Water Well Drilling Rig - Stallion Truck | Pdthr 200

Product Description

Borewell boring machines and boring rigs mounted on a stallion truck are available from Prime Rigs.PRL Truck Mounted Drill Rig Model PDTHR-200 Stallion Truck is primarily designed for water well applications. As drinking water or for agricultural use. PRL PDTHR- 200 Stallion Truck is among the best and most sought after truck mounted drilling rig in the market. It is intended for use in borehole drilling for consumable and agricultural purposes. PRL PDTHR 200 Stallion Truck is designed for114mm 254mm(4.5- 10) diameter holes with a down the hole hammer and 152 304mm(6-12) with Rotary operation.A semi-automatic rig, the Stallion Truck Model Water Well Drilling Rig is suitable for drilling water wells. This setup is effective, long-lasting, and cost-effective. Additionally, the high-quality materials utilized to construct this setup make it a worthwhile financial investment.Our range of vehicles is unmatchable in terms of efficiency and productivity. Our stallion truck is known for its durability and efficiency, strong and heavy truck designs, chassis and suspension equipment designed for off-road operation, and extremely stable frames.Depending on the application and needs, we provide our clients with varied operating and power capabilities of stallion trucks. Before we send our products to our clients, we test them for performance and quality. Synergy Rigs has several advantages, including: Prolonged ServicesUnmatched performance and reliabilityEasy to operateExcellent customer serviceTechnical Specification Prime Mover: Truck Make Stallion Truck Drive 4 x 4 Tyre Size 12.20 Air Compressor(Stallion) Make ELGI CFM 600 PSI 200 Drilling Depth Maximum Depth 200 Meters(656 Feet) Rod Handling 3 inch(10Feet) Hole Diameter DTH 114mm 254mm(4.5"- 10") Rotary 152 304mm(6-12) Truck Ashok Leyland STALLION Mud Pump Make Reputed Make Model 6X 6 Stroke 150mm Liner Size 150mm Mast Max Capacity 18 tons (39600 lbs) Height 6 mtr (19 ft) Rod handling capacity 3 mtr (10 ft) Main Hoist Assembly Line Pull ( Bare Drum) 3000 Kgf Max Line Speed 40 M/Minute Wire Dia 16 mm Drive Hydraulic Feed System Pull Up 11,500 Kgf Pull Down 6,000 Kgf Hoisting Speed 35 Mtr/Minute Welding Generator 250 Amps/400 Amps Auxiliary Winch Bare Drum Pull 1000 Kgf Max Speed 20 M/Minute Hydraulic Circuit Max Operating Pressure 220 kg/cm2 Hydraulic Tank Capacity 600 Liters Filtration Non Returnline 10/25 Microns Rotary Head Torque 600 Kg-M Rotation Speed 1 -100 Rpm Cylinders Stabilizing Cylinders 4 Nos 140 mm(Bore), 610 mm(Stroke) Mast Raising Cylinder 125 mm(Bore), 800 mm(Stroke) Feed Cylinder 140 mm(Bore), 2350 mm(Stroke) Break out Wrench 80 mm(Bore), 300 mm(Stroke)